Berger Swimming Pool Paint 3.8L

• Berger Swimming Pool Paint has a high degree of impermeability to water and water vapour. It effectively retards the passage of moisture through the film, making it an ideal coating for ponds and swimming pools.
• Surface preparation:

• Power wash surface to remove loose material if repainting
• For new pools concrete must be cured and thoroughly dry in depth for at least six weeks. Moisture level less than 15%
• Remove all loose sand, mortar splashes and efflorescence
• Ensure pool has adequate damp proofing behind the wall
• For proper adhesion acid-etch surface with Berger Concrete Etching Solution
• Wash surface with fresh clean water to ensure all un-reacted acid is removed

Application Procedure:

• Apply one coat of Berger Swimming Pool Paint, thinned 20% with Berger No.3 Reducer; allow to dry overnight
• To control cob webbing use 2 coats
• Allow to dry at least 18 hours between coats
• Allow at least seven days drying in optimum conditions prior to filling

• Tips:
• Spot-prime any newly repaired areas with paint or where the substrate is showing
• Clean brushes with  Berger No. 3 Reducer