Berger Metal Red Primer Paint 3.8 Litres

Berger Red oxide primer is formulated for interior and exterior use on ferrous metal and is not usually suitable for galvanized or nonferrous metals like aluminium, copper or brass. Ferrous metals contain iron. To confirm if your metal is ferrous or nonferrous, test it using a magnet. Ferrous metals are magnetic, and nonferrous metals are not. Berger Zinc Chromate Red oxide primer is an anti-corrosion coating, designed to stop rust formation. It can be applied directly over a rusty surface and is most ideal for exterior use. Red oxide primer can be coated with Berger 404, Rustpro or Machinery Enamel once dry. FEATURES:Excellent adhesion, Anti-rust protection, Performs well inside and out Surface preparation: Ensure that all substrates are clean and free from grease or oil A clean surface ensures proper adhesion of the primer Remove all loose and flaking material by scraping with a paint scraper, wire brush or by sanding Application Procedure: When applying red oxide primer, use a brush or a short pile roller Thinning is not required if applying by brush or roller For airless sprayer thin primer 10% to 15% by volume with Berger Reducer #2 Begin thinning with as little solvent and add more as needed until the right consistency is achieved. Spray red oxide primer onto the surface with a minimum working pressure of 2000 psi Apply 1 coat to provide an adequate base coat to your metal Touch dry 15 minutes. To handle 1 hour and recoat time 4 hours